[Tigers] Electronic Ignition

[Ron Fraser]

Bob
	I have been using a Pertronix ignition system for about 30 years
with no problems; stock 260 engine and distributor.
They list a unit just for the dual point distributor with or without vacuum
and it is fairly easy to install and set up.

Accel has or did have a similar part but I have no experience with that
part.

Always check that the advance weights and mechanism has freedom of movement.
You should probably check your advance curve before and after installing any
electronic ignition system just to be sure and check your initial timing.
Anytime you work on the ignition system and change anything, the initial
timing is bound to also change some.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Robert J. Wanty
Sent: Monday, August 08, 2011 8:30 AM
To: Tigers at autox.team.net
Subject: [Tigers] Electronic Ignition


I would like to convert the semi stock 260 ford dual point ignition to
electronic ignition, any suggestions?



Bob

B382001318
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com


No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3812 - Release Date: 08/05/11
06:34:00