[Tigers] Coil Spring Spacer

[Thomas Witt]

Joe,
  The rubber spacers go in the upper cup of the crossmember. The aluminum 
spacers were likely made (or bought) to compensate for spring size 
irregularities (different size, sag etc.) or other misalignments.  I 
actually made spacers out of very hard fabric lined rubber.  In my case it 
was to compensate for cutting a tad too much out of CAT front springs.

Dialing in the front suspension is a bit like arranging furniture for your 
wife.  The likelihood of getting it right the first time is rather small.
Tom