[Tigers] Tiger front hubs

[Ron Fraser]

Allan
	I believe the hubs are the same from Series IV onwards.
See parts List
http://www.tigersunited.com/resources/factory_parts_list/Alpine/alpine_part_
list.asp

You could knurl the inside of the hub, use a series of punch marks, Locktite
or a combination of these to stabilize the race to the hub.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Allan Ballard
Sent: Friday, September 17, 2010 1:39 PM
To: Beamclub TIGER
Subject: [Tigers] Tiger front hubs


My front hubs are a little worn - the front bearing's race will spin.

Rather than weld in new races I'd like to replace both front hubs.

Does anyone know if the Series V Alpine hubs (for steel wheels) are the
same?

Or maybe the Series IV Alpine front hubs?

Thanks in advance,

Allan Ballard
MK1a Tiger
SIV Alpine
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.445 / Virus Database: 271.1.1/3138 - Release Date: 09/17/10
06:34:00