[Tigers] Super Tach

[wsamouce]

I just used the bezels, needle and glass from my OEM Tach.

You will need a Dremel tool too.  I also painted the inside top section with
light blue paint like the OEM housing.

Duke
B382002037

-----Original Message-----
From: Jim [mailto:jim at island.net] 
Sent: Monday, September 13, 2010 11:43 AM
To: Rollright at aol.com; wsamouce at kc.rr.com; tigers at Autox.Team.Net
Subject: RE: [Tigers] Super Tach

Hi Jim

Actually, you need a little more than that...

To make one of these tachs you will need the Autometer Cobra #201004 tach,
one of Paul's reworked Alpine faces ( you supply it ) and the inner and
outer(chrome) bezel from a 4" Jaeger instrument along with front glass( an
old speedo has these same parts ) and a matching needle from a Jaeger tach.
I don't think the speedo needle will work as it's quite a bit heavier than
the tach needle.
You then have to some mods to the Autometer case to make it all fit...

HTH

Jim
B382000446



-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Rollright at aol.com
Sent: September 13, 2010 9:09 AM
To: wsamouce at kc.rr.com; tigers at Autox.Team.Net
Subject: [Tigers] Super Tach

Duke,
 
That tach is super !  Good work to all involved.
 
Seems that one would need three components:
 
1)  the tach
2) an Alpine tach face
3) custom lettering
 
Could you please share the model and part number of the unit you  used for 
the tach (#1) with us?
 
Jim  Armstrong
Mk 1A 382002083
LRXFE