[Tigers] Tiger lockout shifter

[denis mercier]

Hi.
To dismantle the shifter follow these instructions.....
1-Remove (unscrew) the shifter knob, remove the spring inside. There is a 
cable who hold the (T( and the reverse lock at the bottom.
2-You have to use a acetylene/oxygen torch to heat the bottom of the shifter 
and by the same time you heat the bottom, hold the (T( like to shift in 
reverse.
3- When the cable is unsolded, you just have to pull the cable by the upside 
of the shifter.
4-To assemble the shifter reverse the procedure, you have to weld the cable 
by the bottom with acetylene/oxygen torch and bronze.
5-You have to say to the re-chrome guy (does not thicken to much the 
(T(reverse handle( the (T(handle have to pass inside the hole in shifter !
         Denis Mercier
         B382000926LRXFE

----- Original Message ----- 
From: "Gabbard Gabbard" <gabbardalex at att.net>
To: "michael king" <michael.s.king at gmail.com>; "Thomas Witt" 
<atwittsend at verizon.net>
Cc: <tigers at autox.team.net>
Sent: Wednesday, October 13, 2010 2:07 PM
Subject: [Tigers] Tiger lockout shifter


>I want to disassemble my Mk I shifter for re-chroming but can't figure out 
>how
> to take the assembly apart so that the tubes are free to be polished and
> re-chromed. Anyone know how to do that?
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/tigers/denismercier@telvic.net