[Tigers] Lower Grill Finisher Fasteners

CoolVT at aol.com CoolVT at aol.com
Sat Oct 9 10:02:38 MDT 2010


I did mine recently and I believe there were 8  fasteners with a washer, 
lockwasher and nut on each.
Mark
 
 
In a message dated 10/9/2010 11:37:25 A.M. Eastern Daylight Time,  
owain.lloyd at gmail.com writes:

about 5  is enough.  a flat plate with threaded rod coming out  the
middle.  you can file the sides of thre plate so it become just  wide
enough to slide into the stainless strip.  then put bolts and  washers
underneath.

On Saturday, October 9, 2010, Graham Harlowe  <gharlowe at comcast.net> wrote:
> All -
>
> I'll be  installing the lower grill finisher soon.  (This is the stainless
>  trim that fastens to the top of front valance.)  My front valance has  
been
> replaced and I don't recall how many fasteners were used to  attach this
> piece, nor their locations.  Can anyone provide an  estimate for how many
> fasteners were used and approximately where  along the piece they were
> located (i.e. where to drill the holes in  the valance)?  Also, any
> recommendations what to use as fasteners  to attach/retain this piece?
>
> Thanks much, as  always...
>
> Cheers,
> Graham Harlowe
>  B382001466
> _______________________________________________
>  Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
>  Archive: http://www.team.net/archive
> Forums:  http://www.team.net/forums
>  Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/owain.lloyd@gmail.com
_______________________________________________
Tigers at autox.team.net
Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe/Manage:  
http://autox.team.net/mailman/options/tigers/coolvt@aol.com


More information about the Tigers mailing list