[Tigers] Clutch Bearing for 302

[Sandy Ganz]

Don't know if it matters if you are using a 3-Finger pressure plate vs. the 
Diaphram type. Also if this was working then something has changed to make it 
not work that could be a clue into what might be a problem. Also depending on 
the bell housing you might have to use an adjustable stud (Like on some scatter 
sheilds) vs the stock style hook (I guess that what you call it) it may need to 
be set up.

Sandy




________________________________
From: Brian Glenn <ora_archy at yahoo.com>
To: Tigers at autox.team.net
Sent: Tue, November 16, 2010 12:27:12 PM
Subject: [Tigers] Clutch Bearing for 302

I'm installing a 302 in one of my Tigers. My mechanic tells me that the clutch
bearing is to short. I'm not very familiar with variations in the clutch
assembly and would appreciate some guidance.

Thanks,
Brian
B382000846LRXFE

_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/tigers/sganz@pacbell.net