[Tigers] Bellhousing, Trans bolt torque

[spmdr at juno.com]

FYI

I'm real skeptical about torqueing the trans to bellhousing bolts to 65
ft-lbs!

Especially into an aluminium housing, typical Tiger!

I have been using 40 for everything 7/16, with generally good results.

But even 40 into the aluminium bellhousing can be a problem with a short
bolt or bad thread.

YMMV...

DW
____________________________________________________________
Car Insurance for $15/Mo?
New Discounts for Car Insurance Available. See if You Qualify Now!
http://thirdpartyoffers.juno.com/TGL3141/4bf153fbefd18a512m07vuc