[Tigers] Cam Help

[Ron Fraser]

Bob

C2OZ-6265-A		Spacer - Sprocket
C3OZ-6269-B		Thrust plate

Ford made a change March 1965 on the 289 engine; the spacer became part of
the aluminum cam gear, in case you have an aluminum gear.   This change
maybe on the 1965 260 engines after March 1965.

Thrust plate I believe is still available from Ford

Spacer is C shaped to fit by the pin on the cam
OD = 1.558"
ID = .875"
Thickness = .222"
Cam shaft end play = .001-.003"	You may have to change the thickness of the
spacer to obtain this spec

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Robert J. Wanty
Sent: Monday, May 03, 2010 6:23 AM
To: Tigers at autox.team.net
Subject: [Tigers] Cam Help


While changing the timing gears and chain on my 260 I found that the cam
thrust plate is toast and the thrust plate spacer is missing, how it stayed
together is a mystery. Does anyone have these available or have a junk 260
that you would be willing to sell these parts? I could also mill  289 parts
so if you know the thickness of the spacer please let me know. My thrust
plate is 0.217" thick.

Thanks



Bob

B382001318
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.437 / Virus Database: 271.1.1/2844 - Release Date: 04/30/10
06:27:00