[Tigers] New master cylinder brake stuck

Ron Fraser rfraser at bluefrog.com
Sat Jun 12 11:03:23 MDT 2010


Chris
	There should be a spring in the bottom of the bore pushing the
piston back.
You might be able to lightly tap on the Master to get it to move back.
You might need to use some light air pressure to move the piston back; you
will have to remove the brake line for this.

You might want to contact where you bought the master to see if they now of
this problem; if so return it for a good one.

No matter what this is a poor condition and I would take the master back out
and examine it.  I did have a poor return spring in my Master some years
ago.  I found a new spring and rebuilt the master.

Ron Fraser


-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of cjcoffel at sonic.net
Sent: Saturday, June 12, 2010 11:26 AM
To: tigers at Autox.Team.Net
Cc: rollright at aol.com; tigers at Autox.Team.Net; Tod Brown
Subject: [Tigers] New master cylinder brake stuck


Just put a new master brake cyinder in my teiger and it wont build pressure.
Feels like it's stuck at the bottom. Is there an easy way to unstick it?

Chris
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2931 - Release Date: 06/11/10
06:35:00


More information about the Tigers mailing list