[Tigers] 3 gauges stopped working

[Smit, Theo]

The stabilizer only regulates the fuel and temperature gauges (to 10 volts
average); the tach has its own internal regulation. However, a failure of the
stabilizer that shorted the (green) circuit to ground would disable all three
gauges.

Theo

> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-
> bounces at autox.team.net] On Behalf Of Tom Parker
> Sent: July 28, 2010 8:03 AM
> To: Allan Ballard
> Cc: tigers at autox.team.net
> Subject: Re: [Tigers] 3 gauges stopped working
>
> There's a voltage stabilizer behind the dash that's supposed to keep
> the
> voltage constant at @ 12v (see the service manual for the exact
> voltage).
> You might look at he voltage input on one of the failing gauges with a
> volt
> meter and follow the yellow brick road (wiring diagram) if the voltage
> is
> missing or out of spec.
>
> Tom
>


-----------------------------------------------------------------------------
---
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.