[Tigers] fuel guage

[Mike Michels]

Very good advice. I have the solid state one sold by MOSS Motors (and highly
recommend it) it's working fine as the temp gauge and a voltage check have
confirmed. 

I'll be pulling the sender out today and would not be surprised to see that
the float is leaking. 

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Clyde McLaughlin
Sent: Thursday, July 22, 2010 4:22 PM
To: tigers at autox.team.net
Subject: [Tigers] fuel guage

Hi Listers,  before getting into the tank and sending unit which isn't easy,
I'd be sure to ck/repalce the voltage stabilizer for the guage system,
these
are often a problem and easier and cheaper than a sender unit...rpl'd one in
an XKE for a customer in the shop last week,  he had put a guage and two
sending units in himself,  the stabilizer was $35.00 from XK'S unlimited,
probably not the  same exact one for a Tiger,  but SS has them,  Clyde
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/mmichels@socal.rr.com