[Tigers] Turn Signals, Steering Wheels and Seats

[Sandy Ganz]

Thanks all so far for the seat suggestions. Michael was the one that I was 
looking for. I like the look of that seat, still looks vintage. The width of the 
Cobra Classic was 19.3" and the wide point and I think the Corbeau's were right 
at 19" as well. I'll have to get some measurements going.

I may be removing the console and that might allow some wiggle room but will 
have to get the tape measure out tonight.

Also Michael, what did you do to mount those seats, did you use the Sunbeam 
rails or new brackets to mount the seats?  And same question Larry ;)

Thanks a bunch for the feedback!

Sandy




________________________________
From: michael king <michael.s.king at gmail.com>
To: "Smit, Theo" <Theo.Smit at dynastream.com>
Cc: Sandy Ganz <sganz at pacbell.net>; "tigers at autox.team.net" 
<tigers at autox.team.net>
Sent: Tue, July 13, 2010 3:45:57 PM
Subject: Re: [Tigers] Turn Signals, Steering Wheels and Seats


I used the cobra classic bucket, which from what i can tell is almost the same 
as the corbeau classic seat.. the one you have shown looks a little wide.. here 
is a picture of the bucket in my alpine SII.
 http://rides.webshots.com/photo/1136010562054462410yZGscn 


 
On 14 July 2010 07:15, Smit, Theo <Theo.Smit at dynastream.com> wrote:

Check the base measurements on that seat... I'm not sure that it will fit side
>to side. They have the original Classic that is an inch narrower, but even
>that one might be a squeeze to get in there. IIRC, the Tiger rails are also
>not symmetric with respect to the seat centerline so some adapting is required
>regardless.
>
>Theo
>________________________________________
>From: tigers-bounces at autox.team.net [tigers-bounces at autox.team.net] On Behalf
>Of Sandy Ganz [sganz at pacbell.net]
>Sent: Tuesday, July 13, 2010 12:48 PM
>To: tigers at autox.team.net
>Subject: [Tigers] Turn Signals, Steering Wheels and Seats
>
>Tiger Fun -
>
>
>And now an actual question!
>
>Anyone use Corbeau seats in their tiger? I was looking at the Classic II
>models
>and want something that I can drop onto the tiger rails without too much work
>and that don't like like seats from a Honda Civic Racer.
>
>http://www.corbeau.com/products/fixed_back_seats/classic_ii/#
>
>-----------------------------------------------------------------------------
>
>---
>This e-mail and any attachments may contain confidential material for the sole
>use of the intended recipient. If you are not the intended recipient, please
>be aware that any disclosure, copying, distribution or use of this e-mail or
>any attachment is prohibited. If you have received this e-mail in error,
>please contact the sender and delete all copies.
>
>Thank you for your cooperation.
>_______________________________________________
>
>Tigers at autox.team.net
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/tigers/michael.s.king@gmail.com
>
>


-- 
Regards

Michael King