[Tigers] MKII / Six Bolt Clutch Slave Cylinder Setup

[Would U. Believe]

> Hi all.  I have a question about the clutch cylinder setup on the MK2/289
six
> bolt bellhousing.  I have the MK2 clutch slave cylinder bracket and the
MK1A9s
> slave cylinder, so that9s a good start.  But because the clutch fork is
> different from the older 5 bolt housing9s clutch fork, I9m wondering if the
> 3actuating rod2 from the slave cylinder is also different, or if the 2609s
> part will work.    Does anyone know?  Thanks.  ( I hope that all makes some
> sense!)