[Tigers] My project update and a few questions

[Ron Fraser]

Tom
	I have seen some put 2 gaskets under the valve covers to clear
valves.  I don't know if there is enough room for that on the Tiger.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Gyroplanes at aol.com
Sent: Friday, July 09, 2010 12:53 PM
To: tigers at autox.team.net
Subject: [Tigers] My project update and a few questions


Just wanted to give everyone an update.
I moved the replacement 302 engine into my shop and plan to remove the
intake within the next few days (the suspense is killing me) I need to find
out
 if I do indeed have a roller cam engine, so I can order a cam and kit.

I was considering a Ford racing B303 cam, but I have found the Edelbrock
cam (recommended for my manifold and heads) is considerably cheaper than the

FMS  unit and slightly bigger in lift and duration (I'm still worried about
the stock  rockers bumping my LAT Tiger aluminum covers though)

Tom  Milton
Lansing, IL.
1964 Tiger  project
B382000257
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/2990 - Release Date: 07/09/10
06:36:00