[Tigers] Master Cylinder Question

[spook01@comcast.net]

Is there a step by step so as to expedite installation?

Sent from my Verizon Wireless Phone

----- Reply message -----
From: "Joe Parlanti" <Parlanti at comcast.net>
Date: Wed, Jul 7, 2010 08:34
Subject: [Tigers] Master Cylinder Question
To: "'michael king'" <michael.s.king at gmail.com>
Cc: <AAAGLASSS at aol.com>, <tigers at autox.team.net>


I know Larry Paulick is running a Wilwood system on his car.
 
Joseph V. Parlanti
16048 Copen Meadow Dr
North Potomac, Md. 20878
Cell - 301-461-0626
Email - Parlanti at comcast.net
 
From: michael king [mailto:michael.s.king at gmail.com] 
Sent: Wednesday, July 07, 2010 9:30 AM
To: Joe Parlanti
Cc: Would U. Believe; AAAGLASSS at aol.com; tigers at autox.team.net
Subject: Re: [Tigers] Master Cylinder Question
 
Its the 260Z datsun one isnt it? IIRC Dale used to sell them.. i know there
is a datsun pickup one that can be used and the subaru.. then there was
someone who had worked out a wilwood that could be used.
On 7 July 2010 22:38, Joe Parlanti <Parlanti at comcast.net> wrote:
I'm running one from a late '70s Datsun Z. The front and rear circuits can
be separated, or joined through a proportioning valve. I can get a number
off of the part if no one else has it.

Joe Parlanti
B382000026


Snip...
_______________________________________________
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/tigers/spook01@comcast.net