[Tigers] engine installing and steering rack

[Gary]

Paul,
 
No it does not. However, you do need to remove the steering linkage arm
between the rack and the steering column. Before you remove it, put tape or a
mark where the splines line up, so that the steering wheel will end up in the
same place when you reinstall the linkage.
 
It is actually convenient to leave the rack on the crossmember as a handle for
maneuvering the front end around.
 
Gary

--- On Tue, 1/26/10, Paul.Tonizzo at sybase.com <Paul.Tonizzo at sybase.com> wrote:


From: Paul.Tonizzo at sybase.com <Paul.Tonizzo at sybase.com>
Subject: [Tigers] engine installing and steering rack
To: tigers at autox.team.net
Date: Tuesday, January 26, 2010, 11:21 AM


Just curious,

If you are installing an engine from underneath the car, does the steering
rack have to be out?

thanks,

Paul
You are subscribed as maliburevue at yahoo.com

Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive