[Tigers] Help with installing 3.07:1 rear gears, please!

[Cliff Alexander]

Mauro--  Contact Tom Hall at modtiger at comcast.net, he recently sold me one
for the exact same reason you want one.
     Cliff

On Wed, Jan 13, 2010 at 8:20 PM, Jerry & Maureen (Mo) <
JCMC2006 at suddenlink.net> wrote:

> Mauro,
>
> Seems to me if you went to a driveshaft shop they could fix you up with the
> yoke you need to fit a Dana 44.
>
> Jerry Christopherson
> 9473187
>
> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
> On Behalf Of MAURO D'ANGELO
> Sent: Wednesday, January 13, 2010 8:43 PM
> To: tigers at autox.team.net
> Subject: [Tigers] Help with installing 3.07:1 rear gears, please!
>
> I am getting ready to install a posi with a 3.07 gear in my Mark 1A Tiger.
> I know this might seem like a dumb question to the experts, but I think all
> of the new or recent pinions out there now have 26 fine splines and the
> original 2.88 pinions had 10 coarse splines.  So when I install the 3.07
> gear and pinion, I already know that I won't be able to connect my
> driveshaft to the new pinion because the splines won't be able to mate up.
>
> I think this can be resolved by changing the companion flange to one that
> bolts onto the driveshaft the same as the original, but bolts to a pinion
> with 26 splines.  There are two problems with that:  First, I have no idea
> what manufacturer or part number I would need.  Second, I don't know who
> would be able to sell it to me and how much it will cost!  Can anyone help
> me with this information, please?  Thanks!!!
> You are subscribed as jcmc2006 at suddenlink.net
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as mk1a67 at gmail.com
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive