[Tigers] inside a hardtop...darkly

[Rollright at aol.com]

Hello,
 
Gary and I got our hardtops painted and back to his shop. Its been so long  
(too long) since we disassembled them and we didn't photo the "taking 
apart".  How many times do I have to learn this lesson.......
 
We need help. Has anybody a selection of photos of the inside of the  
hardtop? First off, the finish of the slanted rear "buttresses" that make  the 
corner between the side and rear. After that, photos of the finished roof  
inside that show the leading edge and the end. We bought SS Rick's headliner 
kit  but it comes with no instructions. BTW: is there any insulation  between  
the liner and the inside to the steel top? There is precious little on 
hardtops  in the CAT Shop Notes. And I looked in Tigers United but I was  
unsuccessful.
 
I used the glass 1/4 windows from that chap in CA. Nice, I must say. Fit  
just right. And for the record, the pop rivets that hold the 1/4s together 
are  steel. The channels for the window appear to be a brass base with nickel  
only, or chrome plus nickel plating. My guess is just nickel.  They are 
neither stainless nor aluminum, and certainly not  ferrous.
 
Anybody?
 
Jim  Armstrong
Mk 1A 382002083
LRXFE