[Tigers] k engines

[Ron Fraser]

	The 289 HiPo is a combination of specific Ford engine parts with
tighter inspection requirements.

The heads had larger valves, sometimes smaller combustion chambers and screw
in rocker arm studs but I'm not familiar with HiPo cast into the head.   I'm
not the expert on HiPo engines but I have not seen that under the valve
cover.

	Hipo cast into the head would be an extra cost for the casting
process.   If the head did not meet inspection requirements for the HiPo
they would have to be destroyed.  I don't believe Ford did that; if the head
did not meet requirements for HiPo engines it was most likely put back into
the std 289 production line.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Clyde McLaughlin
Sent: Monday, August 30, 2010 5:38 PM
To: tigers at autox.team.net
Subject: [Tigers] k engines


The crank should have a small extra counter weight just behind the balancer
inside the timing cover,  and the "K"  referrs to the engine letter code in
the chassic number of the car,  don't believe its on the crank,  but maybe
it is...the heads are machined differently for the valve springs,  and hi po
is casted on to the head,  take off the valve covers its easy to see,  Clyde
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3102 - Release Date: 08/30/10
06:35:00