[Tigers] Parts needed

A. C. Tynes v8tracker at gmail.com
Tue Aug 24 22:59:43 MDT 2010


Curt and group,

According to George Reid's book, Ford Engine Parts Interchange, the K code
engine block "was the same as the 289-2V and 289-4V block with the exception
being wider, heavier main bearing caps." 

He also says that while the Hi-Po heads are unique castings, there are
better heads available from Ford and the aftermarket now. The Hi-Po
crankshafts were the regular 1M 289 crankshafts but were tested for hardness
and have a Brinell test mark. However, the mark is easily faked so he says
to be careful.

My copy of the book is from 1998. It covers all the pushrod Ford V8 engines
after the Y-block and has been useful as well as an interesting read. 

HTH,
A. C. Tynes
New Orleans 


> -----Original Message-----
> From: tigers-bounces at autox.team.net 
> [mailto:tigers-bounces at autox.team.net] On Behalf Of Curt Bowland
> Sent: Tuesday, August 24, 2010 6:56 PM
> To: Tiger Digest
> Subject: [Tigers] Parts needed
> 
> Thought I might start my search with the list.
> 
> I am presently looking for FMOCO part number C5ZZ-6392-A, SBF 
> 6 bolt scattershield.
> 
> Also looking for a five bolt K series Hipo 289 block.
> 
> Please contact me off list if you have or know of where I 
> might find these items.
> 
> Thanks,
> 
> Curt
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/tigers/v8tracker@gmail.com
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.851 / Virus Database: 271.1.1/3092 - Release 
> Date: 08/24/10 10:31:00


More information about the Tigers mailing list