[Tigers] Barely running - suddenly - input pls?

Steven L. Finberg w1gsl at MIT.EDU
Sun Aug 8 21:01:51 MDT 2010


<   Yes, I'll have to get it done.

<   I think it's a very slow release thing. Don't think I'm deluged with
<   crud. The filter didn't have much.

<   The only line I blew out was the output line, from the carb back.


Now is the time..  The bits of crud in the filter are a side show.
The real problem causing you to stop  are much larger flakes completley
blocking the tank exit.  You can blow them back into the tank but it is
very short lived..  

I couldn't find any chemical I would be willing to put in the tank
that would attack the chips.  MEK didn't touch it...  Roots used a good 
coating.. But it's bond to the metal is slowly failing..  

I finally used quit a bit of mechanical abrasion inside the tank
to get most out..

Good luck

Steve F

*******************************************************************************
Steve Finberg                        W1GSL                       w1gsl at mit.edu
PO Box 397082 MIT Br        Cambridge MA  02139-7082              617 258 3754
*******************************************************************************


More information about the Tigers mailing list