[Tigers] Radiator Overflow Tube

[Joel Martin]

Ron

Excellent, as always thank you for the information.

Joel



-----
Original Message ----
From: Ron Fraser <rfraser at bluefrog.com>
To: Joel Martin
<jmartiniii at yahoo.com>; tigers at autox.team.net
Sent: Wed, August 4, 2010
11:53:17 AM
Subject: RE: [Tigers] Radiator Overflow Tube

Joel
    
Length =
about 3.5" out of the radiator; not sure how much tube is inside
the radiator;
I guess at least 1/4"

Diameter = 5/16" tube

Angle looks a little short of
90, maybe 85 degrees @ about 1" out of the
radiator

The tube should be angled
toward the overflow tank tube; also note that a
somewhat shorter tube will
give you a little more access to getting the
rubber hose onto these metal
tubes; a longer tube will make getting the hose
on more difficult

Ron Fraser
-----Original Message-----
From: tigers-bounces at autox.team.net
[mailto:tigers-bounces at autox.team.net]
On Behalf Of Joel Martin
Sent: Tuesday,
August 03, 2010 1:40 PM
To: tigers at autox.team.net
Subject: [Tigers] Radiator
Overflow Tube


What is the correct length, diameter and angle of the radiator
overflow tube
coming out the drivers' side top portion of the radiator for a
1966 MK1A?  I
will need to add this overflow tube when the radiator is
repaired.

Thanks
martjr
_______________________________________________