[Tigers] Motor Mount Source

[Tom Parker]

Mark,

The ones I bought from NAPA were labeled 82220 & 82221 The implication (Not
the same as "fact") was they were from the same supplier TRW uses. As to the
accuracy, they fit, the thickness seemed to be the same, not that I knew
enough to look closely. No guarantees from me!, just my personal experience.


Tom

On Tue, Aug 3, 2010 at 4:49 PM, <CoolVT at aol.com> wrote:

> *
>
>
> It's easy to find them, but harder to find some that are decent. Most are
> coming from China.  I tried a few sets including some from NAPA.  One set
> was off by 1/2" in thickness. With another set the mounting bolts were off
> by 3/4'.  I ended up with a set that was close....off in thickness by
> 1/16".  I used a metal shim to match them up.
> Mark
> *
>
>  In a message dated 8/3/2010 4:40:02 P.M. Eastern Daylight Time,
> tkparker1941 at gmail.com writes:
>
> NAPA carries them. Early Mustang V8. Also NPD.
>
> Tom
>
> On Tue, Aug 3, 2010 at 3:35 PM, Joel Martin <jmartiniii at yahoo.com> wrote:
>
> > Does anyone have a source for the TRW motor mounts?
> >
> > The TRW numbers are
> > 82220 for the left and 82221 for the right.
> > Thanks
> > martjr
> > _______________________________________________
> > Tigers at autox.team.net
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/coolvt@aol.com