[Tigers] [Alpines] AutoPower roll bar clearance

[DAVID GREEN]

Andy,



I have an Autopower roll bar on Sue's S1. Tight clearance with factory hardtop
but okay. On the soft top I ended up fitting the side doors so they come
straight up and out. This allows the rear door on the soft top to pivot
forward just enough to get soft top up. The rear of the side doors have a pin
and socket set up and on the front of the side doors I made a sleeve to fit
into the original eyelet bracket.

Dave Green owner of 16 Beams

Tucson, Az.

> Date: Wed, 18 Nov 2009 12:29:50 -0500
> From: awtiger at cox.net
> To: alpines at autox.team.net; tigers at autox.team.net
> Subject: [Alpines] AutoPower roll bar clearance
>
> Hey, guys:
>
> Is there anybody out there who is running an "AutoPower" brand roll bar in
their early Alpine (Series I &II)? Are there any clearance issues with the
factory hardtop?
>
> Thanks as usual,
> Andy Walker
> Edmond, OK
> B382001600LRXFE (TAC #740)
> B9006857LRX
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Alpines at autox.team.net
> http://autox.team.net/mailman/listinfo/alpines
>
> http://www.team.net/archive