[Tigers] Exhaust systems?

[Ron Fraser]

	Ask the muffler shop if they can order stainless steel pipe and bend
you a system.
I did this a number of years ago.    I took the Tiger to a friends shop to
fix stress cracks at the rear spring perch and he was talking to another
customer about bending an exhaust system from SS.   That caught my ear and I
had him do the same for the Tiger.   It was about 1/2 the cost.  Check into
it see if someone in your area will give you a quote.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of wsamouce at kc.rr.com
Sent: Monday, May 11, 2009 8:29 PM
To: tigers at autox.team.net
Cc: wellington.samouce at us.army.mil
Subject: [Tigers] Exhaust systems?


Well,

I have blown a hole in one of my mufflers and the pipe from the downpipes to
the mufflers looks bad too.

So I was looking for some advice.

I could go to a local muffler shop and have them install new pipe from the
down pipes to the muffler and replace the mufflers.

Or I could but a system made for the Tiger.

Any info in the SS system for stock Tigers?  Itbs just shy of $600b&lot of
money!

Are there any other complete systems out there that DO NOT need headers?

Thanks so much.

Please respond to wellington.samouce at us.army.mil, I am on the road again.
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.323 / Virus Database: 270.12.24/2107 - Release Date: 05/10/09
07:02:00