[Tigers] Bearing Question? (Conecting)

[THEO SMIT]

If the rods have a piston oiling hole in the main bearing saddle, then you should be using bearings that have a matching hole so that the oil can get squirted up to the piston when the oil passage in the crank passes it by. Maybe the bearing halves are different for the upper saddle and the rod bearing cap?

Theo

----- Original Message -----
From: George Re <Mgman71 at comcast.net>
Date: Sunday, March 8, 2009 9:00 am
Subject: [Tigers] Bearing Question? (Conecting)
To: tigers <tigers at autox.team.net>

> Hello I have a question got my block back  (260) from the 
> machine shop and was putting
> in the first piston my question is the rod bearing I took out 
> had a oil hole in the upper bearing
> but the bearing that I am installing DO NOT have a oil hole in 
> the upper bearing? are these 
> the correct bearing? the parts store say they are correct
> 
> Thanks 
> George
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20090308/cfc798df/attachment.html>