[Tigers] Part # for dual brake master

[Sigma Engineering]

I saved this info from the Classic Motorsports article on Tim's build...
hope that helps, Chris

Tiger Brake System - Classic Motorsports

They used the stock tiger setup except:



1)  New Dual master cylinder

            1980 Subaru 1600 master cylinder w/ 13/16" bore.

            p/n 954 783 7003 (<$200)  (check p/n)

            This required machining a little off the original tiger mc
spacer.

            Also, grind a little taper on the push rod to seat better.


2)  Removed the Brake Booster

            Car did not need booster with this master cylinder.

3)  Added Classic Tube stainless steel brake line kit for the Tiger.

            Available from www.classictube.com





----- Original Message -----
From: "Schonberger, Barry K" <BKSchonb at usi.edu>
To: <tigers at autox.team.net>
Sent: Thursday, March 05, 2009 5:16 PM
Subject: [Tigers] Part # for dual brake master


> I have three possible dual brake master cylinders for the Tiger. Can
> anyone share with me the difference, if any, in these parts and confirm
> part #? Thanks
>
>
>
> Nissan Dual master, NAPA #?
>
> 74-77 Mazda pickup NAPA 39254
>
> Application ?, NAPA 257495
>
>
>
> Barry
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive