[Tigers] windshield

[Ron Fraser]

Kevin
	The only rubber spacer I remember was a wedge piece near the doors.
There is the rubber moulding between the frame and the dash and my Tiger had
a gray rope seal between the rubber and the dash.   The rope seal looked
exactly like Mortell "Mortite" weatherstrip and caulking cord.   The one
thing you want to do is make sure water does not get between the rubber and
the windshield frame so rust can start or continue on the metal frame.

	The wires are color coded so you should be able to check their
locations with the wire diagram.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of kevin beck
Sent: Thursday, July 16, 2009 10:25 AM
To: Tigers at autox.team.net
Subject: [Tigers] windshield


Just got my new dash pad put back on the tiger, and I'm ready to reinstall
the windshield. Are there any rubber spacers that go between the windshield
frame and body before I put the windshield on, I read somewhere there might
be, what size and where do they go? The windshield has been off too long,
and I can't remember. I did mark my dash wiring when I took it apart, but
now that's just masking tape on the wires the writing is long gone after 20
years, buts that's for later. Thanks Kevin
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.12/2235 - Release Date: 07/13/09
05:56:00