[Tigers] tiger air dam and block off plates

[Steve Laifman]

Lot's of List discussion about cooling and block-off plates.  Here is 
what I did, including design drawings and photographs.

Went from abusing friends driveways with green puddles to no overheating 
at any speeds from traffic stop and go to uphill at 105F air temp.

Block-off plate designs patterns and installation photos included (along 
with the other stuff that needs attention).

http://www.tigersunited.com/techtips/SteveLaifmanValance/pt-SteveLaifmanValance1.asp

Luck,

Steve

___
Steve Laifman
Editor - TigersUnited.com
<http://www.TigersUnited.com>



Samouce's wrote:
> That is a great idea.
>
>  
>
> Duke
>
>  
>
> From: CoolVT at aol.com [mailto:CoolVT at aol.com] 
> Sent: Saturday, February 28, 2009 09:41
> To: wsamouce at kc.rr.com; Sjhcobra1 at cs.com; amberlychamberlain at sbcglobal.net;
> tigers at autox.team.net
> Subject: Re: [Tigers] tiger air dam and block off plates
>
>  
>
> When I did  mine I made new mounting pieces for the horns....about 2" longer
> than the originals.  This pushed the horns outside and out of the way of the
> blocking plate.  Then just had to drill a hole for the wires in the
> plate......used a rubber grommet to protect the wires.
>
> Mark   L