[Tigers] tiger air dam and block off plates

[Samouce's]

Frank,

I made some HH blocking plates- 

http://e28-535i.com/upload/HHP1
http://e28-535i.com/upload/HHP2
http://e28-535i.com/upload/HHP3

I used thin aluminum from home depot, weather strip and black paint.  The
hole is not necessary.  I was going to rivet a bracket to hold the piece in
but friction holds it in place and it is on the forward side of the bulkhead
and also has the air pressure to hold them.

I have the cardboard template somewhere.  I would be happy to send it to
you.

Duke
B382002037

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of sjhcobra1 at cs.com
Sent: Friday, February 27, 2009 22:35
To: amberlychamberlain at sbcglobal.net; tigers at autox.team.net
Subject: Re: [Tigers] tiger air dam and block off plates

Frank:

Mike Scharf makes a vey nice set.? He can be reached at Triumphkid at msn.com.

Steve Halbrook


-----Original Message-----
From: Amberly Chamberlain <amberlychamberlain at sbcglobal.net>
To: tigers at autox.team.net
Sent: Wed, 25 Feb 2009 4:21 pm
Subject: [Tigers] tiger air dam and block off plates



Can someone let me know who to contact for a set of the aluminum air dam and
horn block off plates?  If someone has drawing or instructions to make it
that
would be great too.  If someone else is looking for one let me know and I
will
get several made.
 
 
cheers
 
frank
Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

________________________________________________________________________
Email message sent from CompuServe - visit us today at http://www.cs.com
Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive