[Tigers] hose clamps

[Wayne-MSN]

Guys:

You can use MOSS part number 021-577. Although this is for a Girling Servo
on an Austin Healey, it is virtually identical to the clamp used on the
Alpine/Tiger. 

Take care when installing as it is a "use once" type clamp as opposed to the
common spring clamp, wire clamp and worm-gear clamps. 

Here is a link to the MOSS page:
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28899#30

I have used this clamp on my Tiger and Alpines. 

Let me know if you find the vacuum hose with YELLOW stripes.

Wayne

-----Original Message-----
From: Ron Fraser [mailto:rfraser at bluefrog.com] 
Sent: Friday, December 11, 2009 12:23 PM
To: tigers at autox.team.net
Subject: [Tigers] hose clamps

Brian Nichols asked me some questions about the cotter pin hose clamp used
on the brake booster vacuum line.   I barely recall these clamps but I
looked through some of the factory pictures and there they are on both
Alpines and Tigers.
 
Google search produced some results;
 
WSN strap clamp; I have no idea if this is close to the original but it is
the best information I could find.
Anyone have any information about the original clamp?
 
http://www.authenticclassics.com/category-s/213.htm
Located on Staten Island NY
 
I also found this site with double wire hose clamps; Located in Georgia.
 
http://www.englishparts.com/productSearch.aspx?searchTerm=hose%20clamps
 
This information is just FYI; I have never dealt with either company.
 
Ron Fraser