[Tigers] Valve cover clearance

[Ronak, TP (Timothy)]

Theo,

With the Twisted wedge heads and the raised rail I was able to still run the
baffles but had to modify them for the posi lock bolts. It was easy to do but
I do not know how tough that would be with the stock valvecover rail height. I
do know they make some thicker heavy rubber gaskets with a steel shim that may
be a bolt in correction with no grinding. As I recall the gasket provided a <
inch height.



Best Regards,



Tim Ronak

Services Consultant

Akzo Nobel Coatings, Inc.

23961 Via El Rocio

Mission Viejo,  CA 92691

PH: 949-305-5393

Cell: 949-289-3357

FX: 425-955-6268

Email: timothy.ronak at crna.akzonobel.com
<mailto:timothy.ronak at crna.akzonobel.com>

Personal Email: timronak at cox.net <mailto:timronak at cox.net>



If you received this message in error please inform the sender and delete the
message.