[Tigers] Audiovox CCS-100 settings

[Howard gentry]

Hi,
     Of course it works better than your GMC..Guess who Didn't make the
electrics..hehe.
  My Saab has GM electrics..It dosen't work either..Delphi and Lucas must be
partners.
zym(tongue in cheek)
The Blues is the only music Original to the United States of America.

--- On Thu, 4/16/09, Samouce's <wsamouce at kc.rr.com> wrote:


From: Samouce's <wsamouce at kc.rr.com>
Subject: [Tigers] Audiovox CCS-100 settings
To: tigers at autox.team.net
Date: Thursday, April 16, 2009, 9:09 PM


For archive purposes, I am sending this to the list.

First of all, thanks to all of you who responded on the list and me
personally.  I have it working properly now and the cruise will hold at 90+
mph...and below of course.

Just a quick summery of what I did.  The magnet is installed on the drive
shaft, blue wire to the (-) side of the coil, and the rest as the
instructions say.
I may have had an intermittent signal to the coil but fixed that and tested
it per the instructions.

DIP SWITCH setting 1 to 7 that are working on my car.

1 = on
2 = off
3 = off
4 = off
5 = off
6 = off
7 = on

I must say that I am very impressed with this ~$80 unit.  It holds the speed
better than my 2008 GMC.

Thanks again and see you at SUNI V.

Duke
B382002037
Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive