[Tigers] Differential drive shaft flange

[Dave Munroe]

Thanks Sandy:

I had no idea these rear ends were so widely used.

I'll have look around and see what I can find in those corners.

Dave


Sent from my BlackBerry device on the Rogers Wireless Network

-----Original Message-----
From: Sandy Ganz <sganz at pacbell.net>

Date: Thu, 09 Apr 2009 09:51:28 
To: Dave Munroe<dave at munroe.ca>; <tigers at autox.team.net>
Subject: Re: [Tigers] Differential drive shaft flange



Dave -

You might check some of the Jaguar places but not sure if they have the Flange style, also some older 4x4's might have the flange for the Dana 44's. I will have one when I go the other way around by removing the 2.88's, but not for a bit. 

This one from Speedway might work, but not sure about driveshaft length since not a flange style.

http://www.speedwaymotors.com/Jaguar-Yoke,3780.html

I am not sure about 'chevy' u joints but I would guess that is a 1310 as well.

Sandy

 


----- Original Message ----
From: Dave Munroe <dave at munroe.ca>
To: tigers at autox.team.net
Sent: Thursday, April 9, 2009 8:55:26 AM
Subject: Re: [Tigers] Differential drive shaft flange

Hi Guys;

I am in the middle of a posi installation and a gear swap from 3.07 to original 2.88's in my Tiger's rear end.

We discovered on dismantling that the P.O. had installed an American ring and gear set with the fine (26 tooth) pinion shaft and matching flange.

My 2.88's have the original Tiger 10 tooth pinion shaft. Sooooo...

Anyone have a matching, original Tiger, 10 tooth flange they want to sell, or know where I might get one?
Many thanks in advance for any help finding one...

Cheers,

Dave

B382000450_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive