[Tigers] Thunderbird 302s / 90 degree adapter

[Dave Munroe]

Hey Sandy;

Great looking project engine. I was interested in your build-specs - you referenced a Crower Composite distributor Gear.....    
I have just ordered one of those small cap MSD distributors for my Tiger, and its specs indicate it comes with an iron drive gear.
I am running a Comp Cams 270 deg cam with flat tappet hydraulic roller lifters, and had to put a special gear on the end of my 
stock distributor. Do you know if I will need to change this iron gear that comes with the MSD, and if so, is it likely that the gear 
I put on the stock dizzy wil fit?

Thanks,

Dave



----- Original Message ----- 
From: "Sandy Ganz" <sganz at pacbell.net>
To: <achd73 at yahoo.com>; <tigers at autox.team.net>; <CoolVT at aol.com>
Sent: Monday, September 29, 2008 12:37 AM
Subject: Re: [Tigers] Thunderbird 302s / 90 degree adapter


> It was pretty easy making a repacement for the external spin on filter with
> the Canton filter and a new adapter (old one might still work). The only down
> side is that you can't just get a filter at the autoparts store. Good to know
> that hoses last that long ;-)
> 
> http://www.gtsparkplugs.com/TigerEngine.html
> Sandy