[Tigers] Stock looking Hurst shifter

[Jim]

No.the stock shifter has a flat plate on the bottom as I recall..and there
are two bolts that hold it.one in front and one behind. The Hurst bolts on
with two bolts that are spaced vertically on the shaft and fasten crossways
onto the linkage. My Cobra repro handle has a 'T' reverse lockout like the
original but it's just a 'dummy' as there is no internal rod attached to it.

 

Jim

 

  _____  

From: michael king [mailto:michael.s.king at gmail.com] 
Sent: October 1, 2008 10:07 PM
To: Jim
Cc: James E. Pickard; tigers at autox.team.net
Subject: Re: [Tigers] Stock looking Hurst shifter

 

Quick question,

 

I have a hurst shifter in my Tiger, The stock shifter will not bolt up to
this? The linkage arms are different?
-- 
Regards

Michael King