[Tigers] DOT Fasteners

[Hall Motors]

Don't know if this helps with this thread or not?  I needed a couple of
these for a '34 Ford and could find the proper head from several supplies,
but all with a 10-32 tread while I needed an 8-32.  I bought some 10-32s,
ground down the treads and use an 8-32 die to apply new treads.

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Steve Laifman
Sent: Monday, November 03, 2008 1:12 PM
To: Tiger's Den
Subject: [Tigers] DOT Fasteners

Tigers,

I made an inquiry to  DOT Fasteners regarding stainless screw threads.   
This is their reply:

/"Steve,

The Lift-the-DOT screw studs are not manufactured in all stainless.  The
stud head is brass nickel plated and the screw is stainless.  Please let
me know if I can assist you further.

Thanks,

Tonia Hanley
DOT Fasteners
PH 706-754-1000 ext. 468
FAX 706-754-0548
thanley at scovill.com "
/
Steve/
/

-- 
___
Steve Laifman
Editor - TigersUnited.com
<http://www.TigersUnited.com>
Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive