[Tigers] cubby lock

[CoolVT at aol.com]

Well, whatever is should be called, it's apart.  The screw  holding the 
locking arm in place was stripped. I had to grind the head off, take  it apart and 
then using small vice grips was able to get the screw out.   Now I'll try to 
clean the threads up in the cylinder and go with  a  new machine screw.  It 
appears to be #8 x32, but I can't really tell. Would  they have used metric on 
this??/
Mark



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)