[Tigers] Oil Pressure Gauge Fitting

[garywinblad at comcast.net]

CAT used to sell a complete stock replacement SS oil pressure gauge line that
had the right fitting on it..  maybe they still do?
I forget, it was a long time ago but I was able to adapt a standard cheap auto parts
store plastic line kit..  I think I just used liberal amounts of teflon tape..
Gary

 -------------- Original message ----------------------
From: Sandy Ganz <sganz at pacbell.net>
> I was poking through one of my catalogs late last night (Wife out of town) and 
> found what looks to be the the correct fitting. I think the 1/8 Pipe would work, 
> but this is what looks to be the right part and eliminates one more adapter. So 
> -3 hose right to the gauge. The fittings are slighlty different then standard 
> BSP threaded as the back if the gauge has a flat sealing surface which seems to 
> be Smith/Jaeger standard. It's not much more cost then the adapter and a hose 
> end so this looks to be problem solved. I was pretty sure someone had some magic 
> part, I just can't imagine running that plastic tubing in a race car...
> 
> I'm guessing it is a Goodridge part, but here is the link from pegasus racing 
> for those interested -
> 
> http://www.pegasusautoracing.com/productselection.asp?Product=3268
> 
> I'll get a couple and check it out. Looks right.
> 
> Thanks again for the other solutions as well.
> 
> Sandy