[Tigers] Edelbrock Water Pump

[Ron Fraser]

Randy

Here is an email that Eric Coiner sent out;

If the front cover on your 260 is the original design, the proper part is :

Edelbrock 8842

http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL%2D8842&vi
ew=1&N=700+0

You will need to use a hydraulic press to push the hub back to the correct
depth to match your current pump.
You will need to make a sleeve 5/8 id and 1 inch od to keep your pulleys
concentric with the shaft.
As an alternative, you can find a pulley from a Ford fairmont I believe. It
has the same offset has a tiger pulley with a 5/8 hole.
There was a guy on Ebay selling them regularly about 3 years ago.

There are two flavors of 60's vintage Ford SB water pumps. With backing
plate and without.
Without is the earlier design and was replaced some time in the 65 model
year.
Pull your water pump off the car, if you can see the impeller you have no
backing plate.

Edelbrock p/n's

8841  Backing Plate
8842  No Backing Plate
-------------------------------------------------


Ron Fraser


-----Original Message-----
From: tigers-bounces+rfraser=bluefrog.com at autox.team.net
[mailto:tigers-bounces+rfraser=bluefrog.com at autox.team.net] On Behalf Of
Randy Smith
Sent: Wednesday, June 18, 2008 6:05 PM
To: Tiger List Serve
Subject: [Tigers] Edelbrock Water Pump


Does anyone have a part number for the Edelbrock water pump that fits
the 260 engine?

Thanks- Randy
--

Randy Smith
INNER QUEST, Inc.
34752 Charles Town Pike
Purcellville, VA  20132
703-478-1078
540-668-6699
540-668-6253 fax

InnerQuestOnline.com <http://www.innerquestonline.com/>
RSSmithIQ at cs.com
Tiger- B382000189 _______________________________________________
Support Team.Net  http://www.team.net/donate.html

You are subscribed as rfraser at bluefrog.com

Tigers at autox.team.net http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.4.0/1507 - Release Date: 6/18/2008
7:09 AM