[Tigers] grounding theory

Owain Lloyd owain.lloyd at gmail.com
Mon Jun 16 09:55:28 MDT 2008


i guess if you can start the car its grounded ok. :)

i actually have a ground wire on mine though.

On Mon, Jun 16, 2008 at 4:43 PM,  <CoolVT at aol.com> wrote:
> Both the temperature sending unit and the starter solenoid are  shown as
> being grounded.  The question is how well do they have to be  grounded:-)  Will
> using teflon tape on the threads of the sending unit  allow the thread to cut
> through and still ground the unit?
> I wasn't especially careful in scratching away paint at the base of  the
> solenoid to ensure good contact nor was I careful in being sure that  the washer
> on the bolt was making good contact with bare metal to  attach the solenoid.
> How well does this thing have to be  grounded?
> I guess I am used to a picky electrical inspector  that insisted that the
> paint be scraped down to the bare metal and the  metal threaded to ensure a good
> ground.
> Mark
>
>
>
> **************Vote for your city's best dining and nightlife. City's Best
> 2008.      (http://citysbest.aol.com?ncid=aolacg00050000000102)
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as owain.lloyd at gmail.com
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive


More information about the Tigers mailing list