[Tigers] Rear hub removal

[Bill Waite]

James,
   
  Read the info at this link:
   
  http://www.classictiger.com/techtips/rear_hubs.html
   
  Then, at this link:
   
  http://www.classictiger.com/techtips/althubpullr.html
   
  Then, look for a local "Talk Forum" dedicated to 4X4's (Jeeps, etc) and join it.  They will most likely have a tech forum dedicated to "rear ends."  Ask the group where to get a Dana 44 serviced.  You'll find someone who can help you out in the event you have problems doing this yourself.  I've found that the "Jeep Guys" are very helpful and get a kick out of learning that Tigers used Dana 44's too!
   
  Bill Waite
  Grand Rapids, MI
  Mark I & Mark II Since 1979


"James E. Pickard" <geowiz.sgy at cox.net> wrote:
  After spending 1-1/2 years restoring the Sprite (which has now been sold), I'm
back to working on the Tiger. I need to install longer bolts for the lug nuts
so I can use the spacers with the Panasport wheels. But I need to remove the
rear hubs to do this. I don't have tools RG.188-B and RG.188-d-3 described in
the shop manual (nor do I expect to find them). What is the best way to
remove the rear hubs? Since the manual doesn't state otherwise, I assume all
threads are right-handed. Thanks.

Jim Pickard
B9473298 ('65 Tiger)
AN5L/12109 ('59 Sprite) - sold
2003 Mini Cooper
Lafayette, LA
You are subscribed as fordlandia at sbcglobal.net

Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive