[Tigers] Tiger Clutch

[Owain Lloyd]

What's the stock mc bore? My clutch is hard as hell too.  Gives me
cramp in traffic!  Po had a 7/8" tilton mc which I suspect is larger
bore than stock.



On 4/28/08, Sandy Ganz <sganz at pacbell.net> wrote:
> When getting a clutch from David Kee, he had a pressure plate that was for
> the Tiger, I'm not sure if it was just less pressure on the springs, but
> I'll bet it was something like that. Look up his site at David Kee Top
> Loaders.
>
> Sandy
>
>
> ----- Original Message ----
> From: sunbeam john <sunbeamjohn at msn.com>
> To: "tigers at autox.team.net" <tigers at autox.team.net>
> Sent: Monday, April 28, 2008 1:46:50 PM
> Subject: [Tigers] Tiger Clutch
>
> The last owner of my Tiger installed a McLeod clutch and pressure plate. The
> clutch pedal is hard to depress and is killing my bad left knee. Does anyone
> have any suggestions to eliminate the hard pedal besides replacing the
> clutch
> and pressure plate? This Tiger has a 1968 302ci. with a MK2 Wide ratio top
> loader.
>
> Thank you,
> John
> sunbeamjohn at msn.com
> You are subscribed as sganz at pacbell.net
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as owain.lloyd at gmail.com
>
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive