[Tigers] Carb spacer

[drmayf]

You, the world's fastesst SUnbeam (wannabe) has used many aan aluminum 
ball under the hood to measure clearances. Works really well, and sdoes 
not leave modeling clay everywhere, lol... And it holds the  shape 
really well so you can measure it easily.

mayf
Owain Lloyd wrote:

>depends on your hood and engine position.  it's very easy to measure
>by putting a loose ball of aluminum foil on top of the air filter and
>closing the hood.   i used that tequinique to see if i could fit a
>nitrous plate under the carb.  luckily i could :)
>
>On Thu, Apr 17, 2008 at 4:49 PM, Alan Zeni <tiger at missiongranite.com> wrote:
>  
>
>>Does anyone know how thick a spacer I can use between a performer intake and a
>> 600 cfm Holly carb?  And, I assume that I don't need a "heated" spacer like
>> O.E., right?
>>
>> Thanks..........
>> _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>>
>> You are subscribed as owain.lloyd at gmail.com
>>
>> Tigers at autox.team.net
>> http://autox.team.net/mailman/listinfo/tigers
>>
>> http://www.team.net/archive
>>    
>>
>_______________________________________________
>Support Team.Net  http://www.team.net/donate.html
>
>You are subscribed as drmayf at mayfco.com
>
>Tigers at autox.team.net
>http://autox.team.net/mailman/listinfo/tigers
>
>http://www.team.net/archive