[Tigers] Fulcrum pin bolts

[Smit, Theo]

The fulcrum pin bolts are screwed into nut plates that are welded to the
inside of the crossmember. On mine one of the nut plates broke loose; I
drilled a 1/2" hole in the adjacent vertical edge of the crossmember,
which exposed a tang of the nut plate. I used some short fasteners to
hold the nut plate in position, and then rosette welded the plate back
to the crossmember. You could fabricate a new nut plate out of a piece
of steel and some quality 3/8 fine nuts, and then replace the original
nut plate...

Theo