[Tigers] Engine Removal

[Steve Laifman]

Alan, and Tigers,

There are resources available to you concerning the Tiger Maintenance on 
TigersUnited.com <http://www.TigersUnited.com/>. Specifically the 
Workshop Manual describes the factory recommended procedures for most 
any task.  On "Engine R&R" the applicable page is:

http://www.tigersunited.com/resources/wsm/wsmB53.asp  Fig. 86. shows the 
recommended hoisting procedure (provided you have a Rootes Factory hook 
height :-( 

There are loads of Rootes info in this document, which is available from 
Sunbeam Specialties (and thanks to Rick for his reproduction permission.)

Steve

___
Steve Laifman
Editor - *TigersUnited.com <http://www.TigersUnited.com/>*



Alan Zeni wrote:
> I've got everything disconnected from the motor/tranny and am ready to pull
> the pair.  Unfortunately, I don't have the means to drop them out the bottom
> so, according the the shop manual, I need to remove the steering rack.  Now,
> looking in the engine bay, it looks as though that when I drop the rear of the
> tranny, the damper pully will clear the rack easily.  Has anyone done this?
> And, where are the suggested mount points for the chain?
>
> Thanks in advance!