[Tigers] engine mount alignment

[Owain Lloyd]

yes, they're the right way around.

the old mounts had oval holes which were more forgiving and I suppose
there is a little tension in the drivetrain as I had similar issues
changing the rear springs and had to jack the axle backwards.

On Wed, Apr 9, 2008 at 6:38 PM, Smit, Theo <Theo.Smit at dynastream.com> wrote:
> Make sure you have the mounts each on the proper side. If they're the
>  good ones, then there will be about 1/2" difference between the
>  front/back alignment depending on which mount you have on which side.
>  The engine is supposed to be in the more-rearward position.
>
>  Other tips for aligning the mounts (or, for that matter, aligning
>  anything in the engine bay) involve language that is not appropriate for
>  this mailing list...
>  Theo
>
>
>
>  -----Original Message-----
>  From: tigers-bounces+theo.smit=dynastream.com at autox.team.net
>  [mailto:tigers-bounces+theo.smit=dynastream.com at autox.team.net] On
>  Behalf Of Owain Lloyd
>  Sent: April 9, 2008 11:35 AM
>  To: Tiger List
>  Subject: [Tigers] engine mount alignment
>
>  does anyone have any tricks for getting the engine into the right
>  place to bolt up the mounts?