[Tigers] please vote on my thread repair decision
Owain Lloyd
owain.lloyd at gmail.com
Sun Apr 6 16:03:37 MDT 2008
the 1/4" longer bolt will not poke through by more than a fraction.
the existing threads appear sufficient to hold it with this extra 1/4"
inch.
thanks.
On Sun, Apr 6, 2008 at 8:43 PM, <CoolVT at aol.com> wrote:
>
>
> I would think that if there is room and you can get at it that you could use
> a longer bolt and where it pokes through put on a lockwasher and nut. It
> that will work it should be at least as strong as it was originally.
> M
>
>
> ________________________________
> Planning your summer road trip? Check out AOL Travel Guides.
More information about the Tigers
mailing list