[Tigers] After market gages

[65tiger at comcast.net]

Curt
While I was waiting to have my stock tach rebuilt by Tom, I put an 
Autometer in.  I used the stock bezel to fit the Autometer with bezel
into.  It looked great and the tach worked great too.  I used the plastic 
housing nut on the back of the Autometer to tighten a C shaped 
bracket that held it into the dash.  
When I got the rebuilt tach back from Tom, it worked perfectly
at all revs, even the bury the tach rev the engine was capable of...
Curtis

 -------------- Original message ----------------------
From: "Curt" <choffman9 at cinci.rr.com>
> Is there a reasonable after market gage that fits in the 4" hole for the
> speedometer and tach on the Tiger. I have looked at the Autometer and Stewart
> Warner gages and the 3-3/8 gages seem to be what they have. They have some
> that look very stock but the wrong size. I am not so concerned with being
> absolutely stock so much as nice looking and fit well. I saw a Cobra
> replacement that fit close but it was really a different look and had the
> opposite sweep speedometer.
> 
> Curt Hoffman
> _______________________________________________
> 65tiger at comcast.net
> 
> Tigers at autox.team.net
> http://autox.team.net/mailman/listinfo/tigers